Harmonic Reducer Reduction Ratio 1:50, 1:80, 1:100, 1:120 Output
Torque 3.5-160Nm for Robot Joint
PRODUCT FEATURESS
1. High accuracy: a good percentage of its teeth are meshed at all
times, and are engaged at two zones 180 degrees apart. This means
influences of tooth pitch errors and accumulated pitch errors on
rotational accuracy are neutralized, which assures high positional
and rotational accuracy.
2. High speed reduction ratio: a harmonic gear reducer has high
single-stage reduction ratios of 1/30-1/500. Three basic components
along same axle without complex structures can provide high
reduction ratios.
3. High torque capacity:each tooth is subjected to a negligible
amount of force yet provides a high torque capacity because of the
way the teeth come into contact with each other and because a good
percentage of the teeth in the flexspline are engaged at al times.
4. Small-sized and light weight: while being less the size of
conventional gearing mechanisms and less the weight, the harmonic
gear reducer provides the same levels of torque and speed reduction
ratios as its conventional counterparts enabling machinery and
equipment to be made smaller and lighter.
5. Superior efficiency and long life time.
6. Quiet and minimal vibration operation.
Wildly Application:
Industrial robot, service robot , metal machine robot, medical
device, analysis test equipment, energy related equipment,
paper-making machine...
| Model | Ratio | Rated Torque When Input 2000r/min | Maximum Allowed Torque for Starting and Stopping | Maximum Allowed Average Load Torque | Maximum Allowed Instantaneous Torque | Maximum Allowed Input Speed | Arcsec | Lifespan (hours) |
| WCSF | 50-120 | 5.4-137 | 18-353 | 6.9-216 | 35-686 | 4500-8000 | 10-20 | 10000-15000 |
| WCSG | 50-120 | 6.3-160 | 21-413 | 8-253 | 42-803 | 4500-8000 | 15-20 | 10000-15000 |
| WSHG | 50-120 | 6.3-160 | 21-413 | 8-253 | 42-803 | 4500-8000 | 15-20 | 10000-15000 |
| WSHD | 50-100 | 3.5-91 | 11.4-221 | 4.6-143 | 23-397 | 4500-8000 | 10-20 | 10000-15000 |
| WCSD | 50-100 | 3.5-91 | 11.4-221 | 4.6-143 | 23-397 | 4500-8000 | 10-20 | 10000-15000 |
FAQ
Q: What should I provide when I choose gearbox/speed reducer?
A: The best way is to provide the motor drawing with parameter. Our
engineer will check and recommend the most suitable gearbox model
for your reference. Or you can also provide below specification as
well:
1) Type, model and torque.
2) Ratio or output speed
3) Working condition and connection method
4) Quality and installed machine name
5) Input mode and input speed
6) Motor brand model or flange and motor shaft size
Q: Are you a motor manufacturer?
A: Yes, we are motor manufacturer. we develop and produce both the
motors and gear reducers all by our own factory.
Q: How long does it take to finish my order?
A: Normally your order could be delivery in 7-15 days, some hot
sales products could be fast delivered in 1 week. It depends on the
quantity.
Q: Can I get a sample first?
A: Sure, we are honored to offer you sample for test before placing
a formal order.
